Mold Test Kit – How It Can Help You get Rid of Your Mold

A mold test kit allows you to test your home to see if you have any toxic mold present. Since many molds are not toxic and therefore not dangerous to humans, it is important to be able to test for mold and find out if it is black mold. The test kits on the market today let you do this yourself without the costly job of calling in professionals to do it for you. The test kits for mold are easy to use and use the same procedure as the professionals do. With a mold test kit, you can really give your home a really good inspection. If you notice that there is mold growing in the basement or on a surface somewhere else in the home, you can just scrape off a small portion of it into a mold test kit. You do need to wear rubber gloves and a facemask, because if it is black mold, it could be very toxic. You can use a paint scraper to get the mold sample for the black mold test kit, but make sure that you disinfect it beforehand to make sure you won’t contaminate the specimen. Then all you have to do is close the cover on the mold test kit, print your name and address and the time and date you took the sample. You can bring the test kit to a lab to have the mold analyzed. Black mold test kits are not expensive to buy. You can easily pick up a mold test kit for about $15 and it only costs another $30 to the mold sample analyzed in a lab to see if it is toxic black mold. When you look at these prices, compared to what you would have to pay professional technicians to do the job, it is quite easy to be able to do the tests yourself. The hardest part of mold tests is trying to find out whether or not you do have mold in your home. When you can’t see or smell it, it is really hard to know where to look. Fortunately, there are mold test kits for this as well. This type of mold test kit comes with a petrie dish containing a disk. All you have to do is set the dish in an area where you think there may be mold and leave it there for about two hours. Then you close up the kit and let the disc incubate for 48 hours. When you reopen the mold test kit, if you notice there is a fungus growing on the disc, then you need to have it analyzed to see if it is black mold.